Here you will find the suitable hot wax (solvent free - item-no: 2072)

Type TS-170/HWS

Work better, faster and at lower cost !

Hot wax (or hard wax) is used for the dull-gloss surface treatment of furniture, stairs, floors, walls and ceilings. The areas of application are: cabinet making (furniture, parquet and cork flooring) - woodworking operations - prefabricated house manufacturers - interior finishing of buildings etc.
To avoid work breaks - caused by heating up the cartridge - an additional cartridge preheating unit ( KVG-2 and KVG-4), suitable for 2 cartridges, is used. This enables you to work free of interruption.

Special features:

• The wax is sealed airtight in the aluminium cartridge (content 200 g).
• No drying-out of the wax in the cartridge or gun.
• Cleaning is dispensed with.
• Hot oil can also be sprayed using returnable cartridges.
• One cartridge is sufficient for approx. 15 to 20 sq. mtrs.
• Very good spray pattern. The atomization is achieved
• The hot wax does not contain any solvents !
• It can be sprayed at any angle and even vertically upwards (overhead)