Beyer & Otto GmbH

processing equipment for dosing technique.....
.



Dosing Unit
	With this measuring out unity only bags can with a volume of 300-600 ml being processed. The pressure inferior valve is at the end of the top-hat. The top-hat end is transparent and has one Diameter of 50.5 mm. The length is variable, one can between 2 lengths deciding. The work pressure is destitute of at most 6. Version 1: Top-hat length = 275 mm for 300-400 ml FB, 300 Version 2: Top-hat length = 385 mm for 500-600 ml FB, 500 Version 3: Top-hat length = 212 mm for 300ml cartridge Version 4: Top-hat length = 362 mm for 500ml cartridge The advantage of the transparent top-hat end is this for it. It is permanently to recognize filling level. Also the change the bag is rather simple. The material is pushed over a piston forwards. The tripod ST A can be used for it. The control unit STG E also. The measuring out valves listed below can come to use. SK- 100/E, SK- 100/EK, SK- 100/ERK

Dosing valve SK 100E	Usable for:
	An automatic measuring out valve to this squeeze out of cold media.( e.g. oils, greases, paint and varnish ). , The material insulation is carried out at the nozzle end. The nozzle sizes are from 0.50 to 4.00 mm interchangeably. The material order is carried out rope or dotlike. Either the material supply happens about a Hot Melt plant (barrel pump) Weight: 170gr.

Dosing valve SK 100EK	Usable for:
	An automatic measuring out valve to this squeeze out of cold media.( e.g. oils,greases, paint and varnish). The material insulation is carried out at the nozzle end. The nozzle sizes are from 0.35 to 1.50 mm interchangeably and in the length variable. The material order is carried out rope or dotlike. Either the material supply happens about a Hot Melt plant (barrel pump) Weight:170gr.

Dosing valve SK 100ERK	Usable for:
	An automatic measuring out valve to this squeeze out of cold media.( e.g. oils, greases, paint and varnish). The nozzle sizes are from 0.35 to 1.50 mm interchangeably and in the length variable. The material insulation is carried out on a Konus. One talks about one at this measuring out valve Material moving train effect. It causes this at the nozzle no-one is carried out the material run. Weight:170gr.

Dosing valve SK 100S	Usable for:
	An automatic measuring out valve to this squeeze out of cold spray media.( e.g. oils, greases, paint and varnish). The most different spraying orders are possible. Either the material supply happens about a Hot Melt plant (barrel pump) Weight: 200gr.

Stand STA 215 ( 360° )
	Usable for: KB - 300 A (Cartridge 300 ml /Aluminium M15x1,5 ) KB - 300 K (Cartrige 300 ml /synthetic material M15x2,5 ) KB - 500 A (Cartridge 500 ml /Aluminium M15x1,5 ) KB - 500 K (Cartridge 500 ml /synthetic material M15x2,5 ) The tripod has 3 axes and is vertical and horizontally adjustable. It becomes for this one Corrie Indian ink container "KB" used. The tripod is delivered in stainless steel.

Type BO- 450
	Usable for: Pneumatic gun ( 2-component dosing valve ) with 2 material inlets, a 5/2-port directional control valve and two separate outlets for the static mixing nozzle. The piston is double acting, i.e. pneumatically actuated. Without the grip the body of the gun is used for installation purposes. Feed of the material is performed by means of hoses. Weight: ca.800gr.

	Our processing equipment for... • hotmelt / accessories dosing technique for • cold material • hot material • hot waxes • sealing compounts